Airush Unit Bar V2 (50-60cm adjustable)
UNIT CONTROL BAR
Premium all-around control system.
Single PU-covered center line with high front flag out.
Modus bar length adjustment.
Covered depower main line.
Internal landing line.
4 Line Bar: 50 – 60cm Adjustable.
Front: 9 + 10 + 4m Rear: 19 + 4m
For a premium all-round control system that is precise, reliable, and has an expansive trim range, look no further than the Unit Bar. In surf or Big Air, the embossed and sanded-finish grip offers you the ultimate comfort, while a PU-covered depower line gives you uncluttered confidence. In hand, you can feel the reduced diameter tubing make sheeting out reliable and effortless while remaining neat, compact, and durable.
The Unit bar features all the features we could put into a single bar. Starting at the bottom -The Unit bar has a new v2 freestyle leash ring which allows for freestyle mode with the leash connection now behind the IQR rather than hanging off the side. This makes the whole quick release much more compact in freestyle mode and has also increased the strength and reliability in freestyle mode. The Unit bar features a new premium leash with an elasticated webbing bungee and a new quick-release system that’s proven to be much more reliable in the field.
Moving up from the IQR, the Unit bar features a multi-bore tubing PU tube which accommodates both the depower mainline and the landing line, allowing for just a single line to go through the center fitting on the bar. The bar itself features the same stainless steel center fitting with an oversized or enlarged center hole that comes on the Ride bar. The Unit bar is 50 centimeters long with a full 10-centimeter width adjustment available with our modus bar ends taking it out to a 60-centimeter bar when required, by just using a standard fin key. The unit bar features the same 20 increase in floatation EVA bar-ends and increased rear line adjustment available under these bar ends. Coming up to the cleat fitting. This is a custom cleat fitting designed specifically for use with multi-bore tubing and allows for easy access for the landing line into the channel through the multi-bore tube.
The landing line set up on the Unit bar is quite unique it is a high frontside landing line where you have, what appears to be, three lines at the depower bracket
Two of those – your landing line and one front line, go up to the nine-meter position where the bungee that keeps your landing line tight is also located. The reason to do this system is, it gives you all the advantages of kite handling with a low v but allows the landing line to be continuous from your leash attachment all the way to the nine-meter mark meaning no knot being pulled through the multi-bore tubing. This allows the tubing to be much smaller and also much more reliable in the field.
|Bar||RIDE BAR V2||UNIT BAR V2||ULTRA BAR V3||TEAM BAR V1||AP BAR V6|
|Bar Length(s)||50cm and 60cm||50-60cm||50cm||45cm||40cm|
|Flying Lines||Standard Lines||BraidTech BT450-SK76 Dyneema||BraidTech BT450-SK76 Dyneema||BraidTech BT450-SK76 Dyneema||BraidTech BT450-SK76 Dyneema|
|Line Length||Front: 9m + 14m||Front: 9m+10m+4m||Front: 9m+10m+4m||Front: 9m+6m+4m+2m+2m||Front: 21+2m|
|Rear: 9m + 14m||Rear: 19m+4m||Rear: 19m+4m||Rear: 9m+6m+4m+2m+2m||Rear: 21+2m|
|Trim System||Adjustable Cleat||MBT Cleat||NONE||MBT Cleat||Cleat|
|Stopper Wedge||YES with Velcro||N/A||N/A||N/A||YES with Velcro|
|Spare Part C-loop||N/A||N/A||Rope Slider||Large||Large|
|(Shipped in Box)|
|Leash||RIDE leash with clip||Short leash with clip||Short leash with clip||Long leash with swivel and larks head||Long leash with swivel and larks head|
|Spare Parts||40mm Bungies x2||40mm Bungies x2||40mm Bungies x2||40mm Bungies x2||40mm Bungies x2|
|IQR Spring x1||IQR Spring x1||IQR Spring x1||IQR Spring x1||IQR Spring x1|
|AK Fin Key x1||AK Fin Key x1||AK Fin Key x1||AK Fin Key x1||AK Fin Key x1|
|Modus Bar extensions L+R|
|Modus Bar Screws x2|